MicroGuard1® Hard Surfaces Training

MicroGuard1® Hard Surfaces Training

Current Status

Not Enrolled

Price

Free

Get Started

Log In to Enroll

Course Content

Section 1: INTRODUCTION

Lesson 1: Training Overview

Section 2: ONLINE CLASSROOM TRAINING

Lesson 1: Adsil Company Introduction 1 Topic

Lesson Content

0% Complete 0/1 Steps

1.1 Company History & Product Introduction

Lesson 2: Federal Regulations 2 Topics

Lesson Content

0% Complete 0/2 Steps

2.1 OSHA Regulatory Bulletin

2.2 VOC Requirements

Lesson 3: MicroGuard1® Application Training – Hard Surfaces 15 Topics

Lesson Content

0% Complete 0/15 Steps

3.1 Hard Surface Protective System

3.2 Hard Tile Floor Process

3.3 Surface Preparation

3.3.1 Surface Prep: Stripping Sealers

3.3.2 Surface Prep: Cleaning, Conditioning & Rinsing

3.3.3 Surface Prep: Drying the Surface

3.3.4 Surface Prep: Color Seal Installation (Optional)

3.4 Application

3.5 Drying & Curing

3.6 Applying with Anti-Skid Additive (AD5-050)

3.7 Applying with Matte Additive (MG-MT)

3.8 Post-Coating Maintenance & Care

3.9 Recoating and/or Stripping

3.10 Item Check List

3.11 Complaint/Incident Reporting

Lesson 4: MicroGuard1® Application Training – Cementitious Surfaces 14 Topics

Lesson Content

0% Complete 0/14 Steps

4.1 Cementitious Surface Protective System

4.2 System #1 – The Interior Cementitious Surface Process

4.2.1 System #1 (Interior): Surface Preparation

4.2.2 System #1 (Interior): Application

4.2.3 System #1 (Interior): Applying with Anti-Skid Additive (AD5-050)

4.2.4 System #1 (Interior): Applying with Matte Additive (MG-MT)

4.2.5 System #1 (Interior): Post-Coating Maintenance & Care

4.2.6 System #1 (Interior): Recoating or Repair

4.3 System #2 –The Exterior Cementitious Surface Process (with NO Vapor Barrier)

4.3.1 System #2 (Exterior): Surface Preparation

4.3.2 System #2 (Exterior): Application

4.3.3 System #2 (Exterior): Post-Coating Maintenance & Care

4.4 Item Check List

4.5 Complaint/Incident Reporting

Lesson 5: MicroGuard1® Application Training – Metals 6 Topics

Lesson Content

0% Complete 0/6 Steps

5.1 Non-Ferrous & Painted Metals Protection System

5.2 Surface Preparation

5.3 Agitation & Application

5.4 Post-Coating Maintenance & Care

5.5 Item Check List

5.6 Complaint/Incident Reporting

Lesson 6: Technical Data Sheets Review 8 Topics

Lesson Content

0% Complete 0/8 Steps

6.1 MG1-1500 Hard Surface Coating

6.2 AD5-050 Anti-Skid Additive & Mixing Chart

6.3 MG-MT Matte Additive

6.4 MG1-3500 HVAC/R & Metals Clear Coating

6.5 PLC-1 Industrial Cleaner & Degreaser

6.6 PLC-AN Acid Cleaner/Neutralizer

6.7 AD1-919 Spray & Equipment Cleaner (IPA)

6.8 PLC-40 Siloxane Stripper (High Basic pH)

Lesson 7: Cleaning MicroGuard® Floors 1 Topic

Lesson Content

0% Complete 0/1 Steps

7.1 Procedures & Approved Cleaners

Lesson 8: Ordering, Equipment & Field Application 5 Topics

Lesson Content

0% Complete 0/5 Steps

8.1 Product Ordering Guidelines

8.2 Installer Price List/Order Form

8.3 Ancillary Equipment List

8.4 Field Application Data Form

8.5 Kaivac OmniFlex Dispense-and-Vac System

webadmin2024-11-12T16:33:17+00:00October 14th, 2024|