Never apply MicroGuard1® 1500 (MG1-1500) when ambient or surface temperatures are below 60° F or above 95° F. Wear safety goggles, latex gloves, and respiratory protection during installation. Use a pump-up sprayer, with a 9” microfiber roller with 3/8” nap (without stripes), for application. MG1-1500 coating can be applied by pump-sprayer with “spray & back [...]
MicroGuard1® Matte Additive (MG-MT) is a proprietary flattening agent that is designed to be used with MicroGuard1® 1500 (MG1-1500) wherever a matte look is desired. In instances where MG1-1500 is applied to a sealed floor and will remain fully topical, but high shine is not wanted, MG-MT Matte Additive can be added to the MG1-1500 [...]
Some concrete flooring surfaces may be exposed to frequent water contact, cooking oils, grease or other similar exposures may require additional slip resistance. Adsil packages and distributes its MicroGrip™ AD5-050 Anti-Skid Additive just for this reason. MicroGrip™ AD5-050 Anti-Skid Additive is a fine particle bead that provides a tough, traction enhanced texture to concrete walking [...]
***Gently Shake the Bottle for 15 Seconds Before Initial Use, and Before Every Use!*** **NOTE**: MG1-1500 does not cure when air, material, or surface temperatures are below 60° F, or will be below 60°F throughout the curing cycle. Do not apply when air or surface temperatures are above 95° F, or if relative humidity is [...]
Shaking MicroGuard1® 1500 (MG1-1500) or MicroGuard1® 3500 (MG1-3500) Gently shake the unopened product for 30 seconds before use. Now Open, Pour, and Use. Recap any unused product for up to 7 days. Each time the bottle is handled it must be shaken again. Never apply product when ambient, surface or product temperatures are below 600 [...]
MicroGuard1® Matte Additive (MG-MT) is a proprietary flattening agent that is designed to be used with MicroGuard1® 1500 (MG1-1500) wherever a matte look is desired. Matte Additive does not affect coating performance. Coating heavily glazed or high-gloss tile surfaces with minimal available anchor pattern (surface profile) is not recommended. Do not use with Anti-Skid Additive. [...]
Environments exposed to frequent water contact, cooking oils, grease or other similar exposures may require additional slip resistance. Adsil packages and distributes MicroGrip™ AD5-050 Anti-Skid Additive for just this reason. MicroGrip™ AD5-050 Anti-Skid Additive is a fine particle bead that provides a tough, traction enhanced texture to walking surfaces. It is added to and encapsulated into [...]
CAUTION: Wear latex gloves, safety goggles and a respirator fitted with a 3M model 60926 Gases/Vapor cartridge (or comparable) during installation. Lightly shake the unopened product for 30 seconds. Now Open, Pour, and Use. Recap any unused product for up to 7 days. Each time the bottle is handled it must be shaken again. MG1-1500 [...]